Electromagnetic Interference

Also known as:
  • RF Interference
Analog Audio Interference Electrical Cable Common Artifacts

EMI is any type of interference caused by errant and unwanted electromagnetic waves that are received and amplified by an audio system. They can be picked up and recorded into an audio signal and heard upon playback of the contaminated recording. Commonly cited sources of EMI include power lines, engine ignition systems, light dimmers, as well as cell phones. Cell phone specific EMI is commonly termed “GSM Buzz”. GSM (Global System for Mobile) is emitted from cell phones with a pulse rate of 217 Hz, well within audible range.1 “GSM Buzz” however is primarily associated with 1G and 2G cellular phone systems. With the advent of 3G and 4G cellular phone systems this problem is significantly reduced or eliminated as the method of communication between the phone and tower is different.2

Radio frequency interference (RFI) is a type of high frequency electromagnetic interference introduced by an intentional or unintentional source, such as a wireless phone, AM/FM/TV broadcast transmitters, radar systems, a microwave oven, fluorescent lights, and any number of other high frequency RF devices. An improperly shielded audio cable can act as an antenna and pick up unwanted frequencies. While the frequency spectrum of RFI interference is above the range of human hearing, “most audio circuits are nonlinear at these high frequencies, and this causes the interfering signals to be rectified, or detected.”3 What is heard then is not the ultrasonic frequencies, but the problems they produce. The examples on this page reflect some of the symptoms of RFI, ranging from the demodulation of a radio signal to more subtle types of distortion.

Can it be fixed?

When EMI is recorded in the source material, it can not be fixed. However, be sure that the interference is in the original, and not in your system. Proper shielding and grounding should eliminate any interference to the signal that might be picked up by your system. Shielding refers to the protection of the magnetic currents between devices or within cables from stray magnetic fields or electrostatic fields.4 Make sure all of the plugs are plugged tightly into sockets or inputs. Keep playback and recording equipment away from any devices that might introduce EMI and make sure that your cell phone is turned off during transfers.


Listen to RF noise, heard as a crackling sound, discovered in a Betacam SP tape on Soundcloud

Listen to radio interference discovered in a Betacam SP tape on Soundcloud

Listen to an example of GSM buzz, likely emitted from a cellular device and recorded into an audio track on an 8mm video tape on Soundcloud


1. John Whalen, Minimize GSM Buzz Noise in Mobile Phones, EE Times, 20 July 2009.
2. Sascha Segan, CDMA vs. GSM: Whats the Difference?, PC Mag, 09 February 2015.
3. Glenn D. White and Gary J. Louie, The audio dictionary (3rd ed.), (Seattle: University of Washington Press, 2005), 320.
4. Glenn D. White and Gary J. Louie, The audio dictionary (3rd ed.), (Seattle: University of Washington Press, 2005), 209.

Edit this page in Prose! || Edit this page in Github! || File an Issue on Github!